Product Description
Technical Specification
Data Sheet

Single Element Transducers

Elcometer Single Element Transducers are designed for the thickness measurement of thin materials with precision.

Transducer List

 

A single element transducer consists of single crystal element housed in casing. The single crystal both transmits and receives the sound energy. It is common for a Single Element Transducer to be supplied with a delay-line to enable precision measurements on thinner materials.

 

Frequency and Diameter Disks

Transducers are selected by the frequency and size of the crystal. Frequency of the appropriate transducer is determined by the type of material and expected thickness range. The choice of the crystal size is determined by the access, shape and surface finish of the object to be measured.

 

 

Delay Line

 

 

Delay Line

Small part used with single element transducers to slow the sound pulse down to allow measurement on thinner materials. Can only be used with the precision gauges.

Single-Element-with-Cable
Single-Element-2Single-Element-No-CableSingle-Element-Action

Technical Specification

 

PTG Transducers  
The PTG range of intelligent single element transducers has an automatic transducer recognition which ensures correct probe identification even when the transducer is changed. PTG Transducer 

 

 

 

 

 

Suitable for measuring

Suitable for

Part Number

Probe

Diameter

Probe

Characteristic

Damping

Thin

Plastics

Steel

Aluminium

Titanium

PTG6

PTG8

                 

15.0 MHz Single Element Transducer

TXC15M0CM

1/4"

Right Angle

S

                 

20.0 MHz Single Element Transducer

TXC20M0CM

1/4"

Right Angle

S

 

All transducers are supplied with a calibration certificate.

 

 

 

Precision Thickness Gauge Transducers  
Elcometer NDT Single Element Transducers are designed for the thickness measurement of thin materials with precision. Single Element Transducers 
When used with an adaptor, this range of transducers is also suitable for use with the PTG1 thickness gauges. The Elcometer adaptor allows dual element, 'non-intelligent' and other transducers with Lemo Connectors from Elcometer and other manufacturers to be used with the PTG product range.
 
 
1 Transducer Adaptor required - part number T92025657.
 PTG Adaptor

 

         

Connector Type

   

Suitable for measuring

Suitable for

Part Number

Probe

Diameter

Element

Type

Probe

Characteristic

Damping

Microdot

Top

Side

Plastics

Thin

Plastics

Steel

Aluminium

Titanium

PG70 &

PG70DL

PG70ABDL

PTG6*

PTG8*

                               

2.25 MHz Single Element Precision Transducer

TX2M25CM-4

1/4"

Si/El Contact

Standard

S

 

 

 

TX2M25EM-4

1/2"

Si/El Contact

Standard

S

 

 

 

                               

5.00 MHz Single Element Precision Transducer

TX5M00AM-1

1/8"

Si/El Contact

Standard

S

 

 

 

TX5M00CM-6

1/4"

Si/El Contact

Standard

S

 

 

 

TX5M00EM-5

1/2"

Si/El Contact

Standard

S

 

 

 

                               

10.00 MHz Single Element Precision Transducer

TX10M0BM-1

3/16"

Si/El D/Line Pencil

1/16" Tip

S

   

 

TX10M0BM-2

3/16"

Si/El D/Line Pencil

90° Right Angle

S

 

 

 

TX10M0CM-3

1/4"

Si/El Contact

Standard

S

 

 

 

TX10M0AM-1

1/8"

Si/El Contact

Standard

S

 

 

 

                               

15.00 MHz Single Element Precision Transducer

TX15M0CM

1/4"

Si/El Delay Line

Standard

S

 

 

                               

20.00 MHz Single Element Precision Transducer

TX20M0CM

1/4"

Si/El Delay Line

Standard

S

 

 

 

* Transducer Adaptor required-part number T92025657. This adaptor allows single element, 'non-intelligent' and other transducers with Lemo Connectors from Elcometer and other manufacturers
to be used with the PTG product range.

S - Standard Undamped Transducer 

Transducers

@PRODUCT_TRANSDUCERS

Accessories

@PRODUCT_ACCESSORIES

Instruction Manual

@PRODUCT_MANUAL