Product Description
Technical Specification
Data Sheet

Material Thickness Transducers

The Elcometer range of dual element transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection.

Transducer List

 

Dual element material thickness transducers are ideal for inspecting metal substrates but can also measure thicknesses of other materials, such as plastic, composites or fibreglass. 

 

 

Dual Element Transducer

A dual element transducer consists of two crystal elements housed in the same casing, separated by an acoustic barrier. One crystal transmits sound energy whilst the other crystal receives any reflected sound energy.

 

 

Frequency and Diameter Disks

Transducers can be selected by frequency and the size of crystal. Frequency of a transducer is determined by the type of material and expected thickness range. The choice of the crystal size is determined by the access, shape and surface finish of the object to be measured. Each ultrasonic transducer can be easily identified by the disk on the top.

 

 

Dual Element Transducer Characteristics Explained

Dual Element Transducers denoted as HD/CT (Highly Damped Transducer/ Damped Coating Thickness Transducer) are necessary when using the Echo-Echo ThruPaint™ (E-E) measurement mode. Additionally CT (Damped Coating Thickness Transducer) enables simultaneous coating thickness and material thickness measurement on selected gauge models.

Special transducers are available for taking thickness measurements on high temperature surfaces.

 

 

Super Standard
High power transducer for increased range and penetration through sound absorbing materials.

 

High Damped
Limiting the duration or decreasing the amplitude of vibrations. For use with EE (ThruPaint™) only.

 

Composite
High gain transducer for increased power and penetration. 

 

High Resolution
Features increased near surface resolution, ideal for use on thin substrates.

 

Coating Thickness
Utilising ThruPaint™ technology these transducers are capable of simultaneous measurement of coating and material thickness.

Material Thickness Transducers

Technical Specification

 

Material Thickness Gauge Transducers

 

A complete range of dual element thickness transducers for use with the flaw detection gauge ranges : FD700 & FD800

Dual Element Transducers

 

 

 

 

 

 

Connector Type

Suitable for measuring

Part Number

Probe

Diameter

Probe

Characteristic

Damping

ThruPaint

Potted

Microdot

Lemo

Top

Side

Cast Iron

Plastics

Fibreglass

Thin

Fibreglass

Steel

 

1.00 MHz Dual Element Thickness Transducer

TX1M00EP-1

1/2"

Standard

S

 

   

 

   

TX1M00EP-2

1/2"

Standard

S

 

     

   

TX1M00EM-1

1/2"

Standard

S

   

 

 

   

TX1M00EM-2

1/2"

Standard

S

   

   

   

TX1M00EP-3

1/2"

Composite

S

 

     

   

TX1M00EL

1/2"

Composite

S

     

 

   
                             

2.25 MHz Dual Element Thickness Transducer

TX2M25CP-1

1/4"

Standard

S

 

   

 

 

 

TX2M25CP-2

1/4"

Standard

S

 

     

 

 

TX2M25CM-1

1/4"

Standard

S

   

 

 

 

 

TX2M25CM-2

1/4"

Standard

S

   

   

 

 

TX2M25CP-3

1/4"

Hi Temp2

S

 

   

 

 

 

TX2M25CM-3

1/4"

Hi Temp2

S

   

 

 

 

 

TX2M25EP-1

1/2"

Standard

S

 

   

 

 

 

TX2M25EP-2

1/2"

Standard

S

 

     

 

 

TX2M25EM-1

1/2"

Standard

S

   

 

 

 

 

TX2M25EM-2

1/2"

Standard

S

   

   

 

 

TX2M25EP-3

1/2"

Hi Temp2

S

 

   

 

 

 

TX2M25EM-3

1/2"

Hi Temp2

S

   

 

 

 

 

TX2M25EP-4

1/2"

Composite

S

 

     

 

 

TX2M25EL-1

1/2"

Armoured

S

     

 

 

 
                             

3.50 MHz Dual Element Thickness Transducer

TX3M50EP-4

1/2"

Standard

H

     

 

TX3M50EP-1

1/2"

Coating

Thickness

CT

     

 

 

 

 

 

 

 

Connector Type

Suitable for measuring

Part Number

Probe

Diameter

Probe

Characteristic

Damping

ThruPaint

Potted

Microdot

Lemo

Top

Side

Cast Iron

Thin Plastics

Steel

Glass

                           

5.00 MHz Dual Element Thickness Transducer

TX5M00BP-2

3/16"

Standard

S  

   

   

TX5M00BP-3

3/16"

Standard

S  

     

 

TX5M00BP-5

3/16"

Standard

H

     

 

TX5M00BM

3/16"

Standard

S    

   

 

TX5M00BP-1

3/16"

Low Profile

S  

     

 

TX5M00BP-4

3/16"

Coating

Thickness

CT

     

 

TX5M00CP-3

1/4"

Standard

S  

   

   

TX5M00CP-9

1/4"

Standard

H

   

   

TX5M00CP-4

1/4"

Standard

S  

     

 

TX5M00CP-10

1/4"

Standard

H

     

 

TX5M00CM-1

1/4"

Standard

S    

 

   

TX5M00CM-2

1/4"

Standard

S    

   

 

TX5M00CM-9

1/4"

Standard

H

 

   

 

TX5M00CP-1

1/4"

Low Profile

1" Wand

S  

     

 

TX5M00CP-2

1/4"

Low Profile

9" Wand

S  

     

 

TX5M00CP-6

1/4"

Coating

Thickness

CT

     

 

TX5M00CM-3

1/4"

Coating

Thickness

CT

 

   

 

TX5M00CP-7

1/4"

Hi Temp2

S  

   

   

TX5M00CP-8

1/4"

Hi Temp2

H

   

   

TX5M00CM-4

1/4"

Hi Temp2

H

 

 

   

TX5M00CM-5

1/4"

Hi Temp2

S    

 

   

TX5M00EP-2

1/2"

Standard

S  

   

   

TX5M00EP-3

1/2"

Standard

S        

 

TX5M00EP-10

1/2"

Standard

H

     

 

TX5M00EM-1

1/2"

Standard

S    

 

   

TX5M00EM-2

1/2"

Standard

S    

   

 

TX5M00EP-4

1/2"

Coating

Thickness

CT

     

 

TX5M00EP-5

1/2"

Hi Temp2

S  

   

   

TX5M00EM-3

1/2"

Hi Temp2

S    

 

   

TX5M00EM-4

1/2"

Hi Temp2

S    

 

   

TX5M00EP-6

1/2"

Hi Temp2

H

   

   

TX5M00EL-1

1/2"

Armoured

S      

 

 

TX5M00EP-1

1/2"

Cylinder Probe -

Iron

S  

     

 

         

Connector Type

Suitable for measuring

Part Number

Probe

Diameter

Probe

Characteristic

Damping

ThruPaint

Potted

Microdot

Top

Side

Thin Plastics

Steel

Glass

Aluminium

Titanium

                           

7.50 MHz Dual Element Thickness Transducer

TX7M50BP-1

3/16"

Standard

S  

 

 

 

TX7M50BP-2

3/16"

Standard

S  

   

 

TX7M50BP-3

3/16"

Coating

Thickness

CT

   

 

TX7M50CP-1

1/4"

Exxon Spec

S  

 

 

 

TX7M50CP-2

1/4"

Exxon Spec

S  

   

 

TX7M50CM-1

1/4"

Exxon Spec

S    

 

 

TX7M50CM-2

1/4"

Exxon Spec

S    

 

 

TX7M50CP-3

1/4"

High Resolution

S  

 

 

 

TX7M50CP-4

1/4"

High Resolution

S  

   

 

TX7M50CP-6

1/4"

Standard

H

   

 

TX7M50CP-5

1/4"

Coating

Thickness

CT

   

 

TX7M50CM-3

1/4"

High Resolution

S    

 

 

TX7M50CM-4

1/4"

High Resolution

S    

 

 

 

                         

10.00 MHz Dual Element Thickness Transducer

TX10M0BP-1

3/16"

Standard

S  

   

 

TX10M0BP-2

3/16"

Standard

S  

 

   

TX10M0CP-3

1/4"

Standard

S  

 

     

TX10M0CP-4

1/4"

Standard

S  

   

   

TX10M0CM-1

1/4"

Standard

S    

     

TX10M0CM-2

1/4"

Standard

S    

 

   

TX10M0CP-1

1/4"

Low Profile

1" Wand

S  

   

 

TX10M0CP-2

1/4"

Low Profile

9" Wand

S  

   

 

TX10M0EP-2

1/2"

Standard

S  

 

     

TX10M0EP-3

1/2"

Standard

S  

   

   

TX10M0EM-1

1/2"

Standard

S    

     

TX10M0EM-2

1/2"

Standard

S    

 

   

TX10M0EP-1

1/2"

Cylinder Probe -

Aluminium

S  

   

 

 

 

2 High temperature probes suitable for measuring 343°C (650°F)

S - Standard Undamped Transducer 

CT - Damped Coating Thickness Transducer

HD - Highly damped Transducer

H - Highly Damped Transducer

Transducers

@PRODUCT_TRANSDUCERS

Accessories

@PRODUCT_ACCESSORIES

Instruction Manual

@PRODUCT_MANUAL

Data Sheet

@PRODUCT_DATA_SHEET