:
SG80BDL Sonic Gauge
Product Description
The SG80BDL sonic gauge is commonly used for measuring the thickness of cylinder walls, intake or exhaust ports, chassis, tubing, body panels, and windscreens. It also has the ability to scan the length of a part to find the minimum thickness.
The time-based B-Scan feature of the SG80BDL sonic gauge displays a cross section of the opposite surface, allowing engine builders the ability to see the contour of the back surface in cylinders while scanning.
Use the Echo-Echo ThruPaint™ feature of the SG80BDL sonic gauge to measure chasis tubing with or without paint and other coatings.
Advantages
- Range of display & measurement options: Pulse-Echo, Echo-Echo ThruPaint™ technology
- Multiple calibration and material selection options
- Adjustable gain: -30dB to 70dB range
- Automatic gain control (AGC)
- 64 User definable setups
- High speed scan: 32 readings per second
- Differential and minimal thickness alarm modes
- Data output and storage: 12,000 readings and waveforms or B-Scans
- Data management software
 |
|
Technical Specification
| Model & Part Number | SG80BDL Sonic Gauge |
| Material thickness digits display | • |
| Measurement Mode | PE & EE (ThruPaint™) |
| Measurement Rate: Manual: Scan Mode: |
4 readings per second 32 readings per second |
| Measuring Range | PE 0.63 - 254mm (0.025 - 9.999 inches) EE 1.27 - 102 mm (0.050 - 4 inches) |
| Measurement Accuracy | ±0.01mm (±0.001 inch) |
| Measurement Resolution | 0.01mm (0.001 inch) |
| Velocity Calibration Range | 1250 - 10,000m/s 0.0492 - 0.3937in/μs |
| Additional Features: | |
| High speed scan mode | • |
| Limit alarm mode | • |
| Data logging | 12,000 readings (+ B Scans) |
| Calibration Options | 1 & 2 point, velocity and material selection |
| Transducer Probe Type | dual element |
| Transducer Frequency Range | 1 - 10MHz |
| V-path / dual path error correction | automatic |
| Display | 1/8 VGA |
| Units (selectable) | mm or inches |
| LED Backlight | on / off / auto |
| Repeatability / Stability Indicator | • |
| Battery Type | 3 x AA alkaline |
| Battery Life (approximate) | 150 hours |
| Low Battery Indicator | • |
| Battery Save Mode | auto |
| Operating Temperature | -10 to 60ºC (14 to 140ºF) |
| Size (w x h x d) | 63.5 x 165 x 31.5mm 2.5 x 6.5 x 1.24 inches |
| Weight (including batteries) | 383g (13oz) |
| Aluminium case design with gasket sealed end caps, waterproof membrane keypad |
• |
| Transducer Connector Type | LEMO |
| RS232 Interface | • |
| Packing List | Elcometer NDT SG80BDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, software, transfer cable |